Uplink types

Set uplink messages type command explanation.

This command is used to set the device sent uplink message type. The command is described in Table 11.

Byte inde	Bit index	Hex value – Meaning
0	-	11 – The command code.
1	-	00 – The device sends unconfirmed uplink messages; 01 – The device sends confirmed uplink messages. Default message type for the device

Table 11

Example command: 0x1101 – The server sets device uplink message type to confirmed.

Get uplink messages type command explanation

Byte index	Bit index	Sent request	Received response
0	-	1B – Command code.	1B – The command code.
1	-		00 – The device operates with unconfirmed uplinks; 01 – The device operates with confirmed uplinks.

Table 12

Example command sent from server: 0x1B;

Example command response: 0x1B00 => Device uplinks are unconfirmed.