Child lock

When the child lock function is on, all buttons on the front panel of the device are locked for manual control.

You can manually enable/disable the Child lock by pressing the OK button followed by the Up button and holding for 4 seconds.

SET

Byte index	Hex value – Meaning
0	07 – The command code.
1	00 – Turn off the child lock function; Default value 01 – Turn on the child lock function.

Example downlink: 0x0701 – Turn on the child lock function.

GET

Byte index	Sent request	Received response
0	14 – Command code	14 – Command code
1		00 - Child-lock is disabled; 01 - Child lock is enabled

Example downlink sent from server: 0x14;

Example uplink response: 0x1401 – The child-lock is enabled