Restart device

Restart the device, causing it to power cycle, and initiate a new join procedure.

Using this command will effectively disconnect the connected appliance for a brief period.

Byte index	Hex value – Meaning
0	A5 – The command code.

Example downlink: 0xA5

The following mechanic only applies for devices with firmware version ≥ 1.2.

If the command is sent via an unconfirmed downlink, the device starts a 20-second delay period, after which it restarts.

If the command is sent via a confirmed downlink, the device transmits an acknowledgment uplink, then starts the 20 second delay period, after which it restarts.