Uplink types

SET

This command is used to set Fan Coil Thermostat uplink message type.

Byte index	Hex value – Meaning
0	11 – The command code.
1	00 – Fan Coil Thermostat sends unconfirmed uplink messages. Default. 01 – Fan Coil Thermostat sends confirmed uplink messages.

Example command: 0x1101 – The server sets the uplink message type to confirmed.

GET

This command is used to get Fan Coil Thermostat uplink messages type.

Byte index	Sent request	Received response
0	1B – Command code.	1B – The command code.
1		00 – The Fan Coil Thermostat uses unconfirmed uplinks uplinks; 01 – The Fan Coil Thermostat uses confirmed uplinks.

Example command: 0x1B;

Example response: 0x1B00 - The Fan Coil Thermostat sends unconfirmed uplinks.

The keep-alive in the example above is omitted for clarity.