Min/Max Setpoint adjustment

SET

This command is used to set the possible min. and max. target temperature values.

Byte index	Hex value - Meaning
0	08 – The command code.
1	XX – lower temperature limit. Min. Default value: 0x00 (0°C).
2	XX – upper temperature limit. Max. Default value: 0x28 (40°C).

Example command: 0x081018 – Sets the lower temp. limit to 16°C and the upper temp. limit to 24°C.

GET

This command is used to get the possible min. and max. target temperature values. The keepalive data is omitted from the response for clarity.

Byte index	Sent request	Received response
0	15 – Command code	15 – Command code
1		XX - min. target temperature value.
2		XX - max. target temperature value.

Example command: 0x15;

Example response: 0x151018 – The lower temp. limit is 16°C and the upper temperature limit is 24°C.

The allowed lower temperature range is 0...38°C (1°C resolution).

The allowed upper temperature range is 0...40°C (1°C resolution).