🆕MClimate CO2 + PIR lite

General Information

MClimate CO2 + PIR lite LoRaWAN is a stand-alone sensor powered by 2xAA batteries lasting for up to 15 years with the default configuration. The device features NDIR CO2 sensor, PIR (occupancy) sensor, as well as temperature and humidity sensors. The data from the CO2 + PIR lite can be used in any LoRaWAN compatible system, incl. Building Management Systems to control demand-based ventilation. Sensor information can be exposed as datapoints in Modbus, BACnet and KNX systems through the use of a special gateway.

Learn more about MClimate Smart Building Solutions:

Smart Buildings - Scalable LoRaWAN & NB-IoT Solutions by MClimateMClimate

Purchase MClimate CO2 Display lite:

MClimate CO2 + PIR liteMClimate

Features

• PIR (occupancy) sensor

• NDIR CO2 sensor

• Temperature and Humidity sensor

• Firmware Update Over The Air (FUOTA)

• Ultra low power consumption

• Sends message on occupancy

• Counts total amount of movements

• Double-sided tape on the back

Power supply

• Powered by 2xAA batteries (each 1.5VDC)

• Operating voltage: 3.0VDC

• Expected battery life: Up to 15 years with default configuration (depending on radio environment)

Compatibility

• LoRaWAN 1.0.3, class A device, EU868 (other LoRaWAN regional settings available upon request)

• Encryption: LoRaWAN End-to-end encryption (AES-CTR)

• Supported LoRaWAN Features: OTAA , ADR , Adaptive Channels setup

• Link budget: 130dB

• RF Transmit Power: 14dB

Sensors

1. CO2 sensor

• Accuracy: ±(30ppm +3% of reading)

• Range: 400-5000ppm

2. Temperature sensor

• Resolution: 0,1°C

• Accuracy: ±0,2 - ±0,3°C

3. Humidity sensor

• Resolution: 2%

• Accuracy: ±3% (typ) - ±3% (max)

4. PIR

• Angle of View: X = 100° ; Y = 90°

Mounting warning

If you have any questions, feel free to reach out to us at [email protected]